2.4
Manually override the set-point temperature:
You can manually override the set-point temperature of the current program period without stepping into
the programming procedure. When you override the set-point, it will only be applicable until the end of the
current program period. To change the set-point temperature at any time, press the
(+)
or
(-)
buttons until
the temperature you desire appears on the display. The new temperature will be retained until the next
program period starts.
Also see the illustrated steps described in section 1.3 to override the programmed set-point
temperature.
When overriding a program period – no program period name will appear on the
display.
2.5
Putting the program on hold
The thermostat can be operated manually – without the program – at anytime, and the program can be
reactivated again anytime later.
Putting the program on hold
The thermostat must be turned “ON”
Press and hold (5 seconds) the
Prog
button until the hours on the display stop flashing.
The word “Program” will disappear from the display.
Reactivate the program
Press and hold (5 seconds) the
Prog
button until the hours on the display stop flashing.
The word “Program” will appear on the display.
17
Summary of Contents for ERV-24-SUPER
Page 26: ...Comments 26 ...
Page 27: ...Comments 27 ...