background image

15

These 10 Purification tips are designed to demonstrate immediate results and help speed up the
purifying process in your home or office.  These steps can provide amazing results and are well worth
recommending to family and friends!
Please note that with everyday normal use, the air purifier should be securely located on the highest
piece of furniture in your main living area.
NOTICE:  During the purification process you may get a "Bleach" smell, that's good! It tells you that the
air purifier is working and the O3 is oxidizing (breaking down) the toxins, chemicals and bacteria into
pure Oxygen, H2O, and Carbon Dioxide.  This purification process turns your stale, toxic, sick home air
into a vibrant healthy home environment.

NOTE:  Some steps work best with the EdenPURE™ G-7 .

PUT YOUR AIR PURIFIER TO THE TEST...

THREE RULES TO REMEMBER

Your new air purifier not only helps purify indoor air, but all your home surfaces as well. That's right,
your carpets, clothes, towels, shoes, cat, dog, you, your children and the list goes on and on.
A.  HAVE FUN! Experiment!  Your air purifier is portable!  Move it around!  But be considerate of the  

other people in the house.  It is rare, but occasionally some people initially do not like the smell of 
the Activated Oxygen and that's O.K., they eventually will. Once you sanitize and bathe your entire 
home with nature's cleaning elements, only a small, undetectable amount of O3 is necessary to 
maintain the natural level of purity.  Put it through its paces and marvel at the magic of nature's 
purification at work indoors.

B.  ALWAYS keep the back (G-7) or sides (area model) of your air purifier clear of obstructions so 

at to allow it to properly draw air through it.

C.  ALWAYS be watchful of the electric cord.  Keep away from water and excessive heat, and prevent 

pinching the cord.

RV Vehicles

(Boats and other target items)

Have you ever taken the cover off your boat and been blown away by the musty smells?  This tip will purify
your musty seasonal clothing, tenting and camping gear, as well as RVs.  Do this step if you want to protect
your valued items from nasty odors and potentially harmful mold and mildew while they are in storage.
A.  Place opened items or opened hanging items in front of your air purifier in a closet or storage unit.  

Or, lay the gear out on the floor tented with a sheet leaving the back (G-7) or sides (area 
model) open for ventilation.

B.  Turn the air purifier on.  Set the purify setting to its highest level (G-7).  Select the ozone option 

for the area model.

C.  Allow this “setup” to run for 1 to 2 hours.  Let your nose be the judge.
D.  For RVs, campers, tents and boats, place the unit inside and make sure there is a small window or 

a vent open for ventilation.  Leave the purifier in the unit for 2 to 24 hours depending on the severity 
of the mold or odor problem.  NOTE:  If you are allergic to the outdoor pollen and mold that finds its 
way into the RV or camper at night or you are an avid camper, consider investing in a second 
Purifier for travel.  Remember, when mold oxidizes, it smells like Chlorine.  Wait for the after 
thunderstorm fresh air smell before removing the unit or turning it down/off.

Automobiles

Keep your car smelling fresh or "detox" a new car

This step can help you reduce or eliminate that stale smell your car can get as it ages, as well as help
eliminate the hazardous toxic fumes left behind in a new car, or odors from a smoker or a pet
passenger.  This is a single treatment that will have to be repeated again and again as fumes build up.
A.  Place your air purifier on the front seat of your car.
B.  Make sure the back (G-7) or sides (area model) of your air purifier are clear so you maintain 

good airflow through the machine.

C.  Turn your car ignition to the "on" position and turn your car's heating/cooling ventilation fan on.
D.  Turn the air purifier on.  Set the purify setting to its highest level (G-7).  Select the ozone option 

for the area model.  Set the fan to medium.

E.  Watch the cord as you close the door or put it through the window.
F.  Allow this “setup” to run 1 to 2 hours or longer depending on the smells.  Your nose knows.

10 PURIFICATION STEPS TO A HEALTHY HOME

I-4506 BR7580R-1  6/25/07  7:57 AM  Page 9

Summary of Contents for A2840/R





















Reviews: