3
ASSEMBLY AND OPERATING INSTRUCTIONS
Open carton, remove contents, and compare contents with parts list
Note: To prevent scratching of the frame, it is recommended that you lay the parts out on top
of a flattened cardboard box, or other soft surface.
1.
Remove all contents from the carton. Check to make sure nothing is left in the box.
2.
Unwrap all parts and compare them with the parts list and the above picture. Make sure
nothing is missing.
STEP 1
Attaching the folding trailer arm
1A
1B
1A.
Position the trailer arm to the Runabout frame as shown. Line up the three holes to
begin assembling the hinge.
1B.
Insert the receiving half of the frame pivot bolt through the three holes and insert the
screw to the pivot bolt. Use the Allen wrench to tighten.
