background image

 

1

  

Runabout 

Model 13-SC250/SC350 Trailer 

Owner’s Manual

 

Please keep this Owner’s Manual for future reference.  If you sell or give this product away, please include this 
Owner’s Manual, and ask the new owner to read the instructions completely before operating. 

 

PRIOR TO ASSEMBLY: 

 

‰

 

Please read this Owner’s Manual completely before assembling or operating this product. 

‰

 

Assembly of this product should be carried out by an adult. 

‰

 

Parts are wrapped in paper or protective covering to prevent damage during shipment.  Remove all parts and 
packing materials from the box prior to assembly.  Save all packing materials until assembly is complete to 

make sure no parts are accidentally thrown away.  After assembly is complete, properly discard all waste.   

‰

 

Refer to the Parts List and Diagram on page two of this manual to make sure all parts are accounted for. 

‰

 

Do not return this product to the store!  If any parts are missing or damaged, please contact one of our 

Customer Service Representatives by phone at 1-800-242-6110, or by e-mail at 

[email protected]

.  

 

IMPORTANT SAFETY INFORMATION: 

 

   

WARNING Always wear an approved safety helmet when riding! 

   

WARNING

 

Never leave your child unattended on this product! 

   

WARNING This trailer bike is designed to attach to an adult bicycle with 26”, 27”, or 700C wheels!   

   

WARNING This trailer bike does not have a brake.  Make sure the adult bike brakes function properly! 

   

WARNING Recommended for ages 4 through 9!  Maximum weight capacity of rider is 75 pounds!

 

   

WARNING Make sure the child riding the trailer bike understands how to operate it correctly! 

   

WARNING Always use the safety flag when riding with this product! 

  

WARNING A bicycle with the trailer bike attached requires a wide turning radius!  Use caution when turning! 

   

WARNING Do not ride over curbs!  Avoid bumps and potholes!  Do not turn sharply!  

   

WARNING Before riding, check that all parts are assembled correctly per the manufacturer’s instructions! 

   

WARNING Tire should be inflated to the pressure reading shown on the tire sidewall!  Check before each use! 

   

WARNING Use a foot pump or hand pump to inflate tires!  Pressurized air hoses can cause overinflation! 

 

WARNING Do not ride at night!   

 

WARNING Do not ride barefoot! 

   

WARNING Do not ride in wet weather or when road surface is slippery!

 

   

WARNING Periodically re-check all fasteners to make sure they are tight!   

 

TOOLS REQUIRED FOR ASSEMBLY: 

 

 

‰

 

Adjustable wrench   

‰

 

6mm Allen wrench   

 

‰

 

5mm Allen wrench

 

Summary of Contents for Runabout 13-SC250










Reviews: