2
EASy Reference Guide - S38SX
Service Bulletin
the outrigger into proper setup position. The warning
message will go away and you can resume pumping
concrete.
Bypass Outrigger Sensors
If you don't want to reposition the outrigger, press the
CLEAR button as instructed on the screen. The warning
message will go away and the outrigger sensors will be
bypassed - meaning the machine will no longer monitor
the position of the outriggers. The placing boom will still
be limited to the selected working range.
If you bypass the outrigger sensors, you are responsi-
ble for maintaining the setup of your machine, ensure
the outriggers are not moved until the after boom is fold-
ed up and placed in the cradle.
If you try and move the boom with the "
Check outrig-
gers !
" warning message displayed, you will receive an-
other fault message "
! Machine Safety Stop! Machine
not correctly stabilized!
" A horn will sound and the
boom will stop moving. To continue moving the boom
press the QUIT button once. The warning horn will shut-
off, but the message will still appear. Press the QUIT
button again to clear the fault message. The boom can
now be operated normally.
! Machine Safety Stop !
Machine not correctly
stabilized !
18.09.18(ddmmyy)13:09:37
(E45H)
[QUIT] ???
->[QUIT]
!!! ERROR !!!
STOP!
2
Temporary Truck Shutdown.
At times you may want to setup the machine and then
shut the truck off while you wait for concrete.
With the machine properly setup, shut the truck engine
off. When you are ready to resume, turn the truck engine
back on. The Vector control panel will power up. You will
receive the following warning "
! Machine Safety Stop!
Boom is Not in Cradle!
" Press the QUIT button once
to silence the horn, press the QUIT button again to clear
the fault message.
! Machine Safety Stop !
Boom Is Not In Cradle !
18.09.18(ddmmyy)13:34:37
(S21H)
[QUIT] ???
->[QUIT]
!!! ERROR !!!
OK
The next message to appear is "
Is the unit supported
by all outriggers?
" Since we have already properly set
up the machine, all we have to do is the press the out-
rigger buttons on both sides of the unit for 5 seconds
- or until you hear the horn beep. The machine is now
ready to operate.
Is the unit
supported
by all
outriggers?
EASy assistant
OK
Is the unit
supported
by all
outriggers?
EASy assistant
OK
