Schweizer eMag 200, User Manual

Page: 27 / 82

27
GB
Connectors on the back of the unit
Use this image and the descriptions on the next page to identify the
e
Mag 200 connectors.
1. Port for the control panel:
The control panel and the
e Mag 200
camera are con-
nected via the module port.
Do not disconnect the cable
unless servicing the unit.
2. Power port: Plug the mains
connector from the wall outlet
into the
e Mag 200 .
3. Monitor power port: Plug the
mains connector from the
monitor into the
e Mag 200 .
4. Monitor DVI port: Connects
the
e Mag 200 monitor with
the
e Mag 200
camera.
There is no need to remove
this monitor cable during
normal operation.