Schweitzer Engineering Laboratories SEL-787, Instruction Manual, Page: 413 / 564

D.25
Date Code 20081022 Instruction Manual SEL-787 Relay
DNP3 Communications
DNP3 Documentation
Default Data Map
The default data map is an automatically generated subset of the reference
map. All data maps are initialized to the default values, based on the SEL-787
part number.
Table D.13 shows the SEL-787 default data map. If the default
maps are not appropriate, you can also use the custom DNP mapping
commands
SET DNN and SHOW DNN to create the map required for your
application.
Analog Inputs
30, 32, 34 IAW1_MAG–SC32 Analog Quantities from Table K.1 with an “x” in the
DNP column
0 Numeric 0
1 Numeric 1
Analog Outputs
40, 41 GROUP Active Settings Group
NOOP No operation, no error
Table D.12 DNP3 Reference Data Map (Sheet 2 of 2)
Object Labels Description
Table D.13 DNP3 Default Data Map
Object Default Index Point Label
01, 02 0 ENABLED
1 TRIPXFMR
2 TRIP1
3 TRIP2
4 STFAIL
5 STSET
6 IN101
7 IN102
8–99 A portion of these binary inputs can have default values as
described in
Binary Inputs on page D.26 . Outside that
scope, they contain the value NA.
10, 12 0–31 RB01–RB32 Remote Bits
20, 22 0–31 NA
30, 32, 34 0 IAW1_MAG
1 IBW1_MAG
2 ICW1_MAG
3 IGW1_MAG
4 IAW2_MAG
5 IBW2_MAG
6 ICW2_MAG
7 IGW2_MAG
8 IAVW1MAG
9 IAVW2MAG
10 3I2W1MAG
11 3I2W1MAG
12 FREQ
13–99 A portion of these analog inputs can have default values as
described in
Analog Inputs on page D.26 . Outside that
scope, they contain the value NA.
40, 41 0–31 NA