Schwarz Etienne ASE 100.00, User Manual

Page: 18 / 23

Adjustments for ASE 120.00 version
By operating the three-positioned stem
1. Manual winding
2. GMT correction
3. Time setting (stop second)
ASE MANUFACTURING MODELS
AUTOMATIC MOVEMENT WITH DECENTRED MICRO ROTOR, MANUFACTURED BY SCHWARZ ETIENNE
SETTING THE TIME
The time is set by means of the crown.
The procedure is as follows:
1.
Pull the crown out by one notch (position C)
Note: If your watch has a seconds hand, this is disengaged when the crown is in the
time setting position.
2. Turn it clockwise to bring up the desired time
3. Push the crown back in against the case once the date has been set (position A).
The watch will restart instantly
On an automatic winding watch, the winding does not reach a stop. A few turns of
the crown are sufficient to restart it.
GMT 24 HOUR CORRECTION FUNCTION
The second time zone time is synchronised with the
main time and can be corrected at any time.
The procedure is as follows:
1.
Pull the crown by one notch (position B)
2. Turn it to position the GMT hand to the desired time
3. Push the crown against the case, in the winding
position (position A)
USER MANUAL |
16