novoSchwank shape U
47
Version 013 nov
o
sha
p
e U 38/1
9_
IN
T Techni
cal
s
p
e
c
ifi
c
a
tio
n s
ub
jec
t t
o
chan
g
e
14 Accessories
Ball guards
Ball protection grids acc.18032-3 for using
heaters in sport halls [grid 40x40 mm].
Delivery scope
Mounting set complete for each type of heater existing of:
novoSchwank shape U
20S U
25S U
35S U
45S U
55S U
Ball protection grid L=1843mm
2x
2x
2x
2x
Ball protection grid L=2203mm
1x
Ball protection grid L=2963mm
1x
1x
2x
Protection
grid
burner
top
1x 1x 1x 1x 1x
Front
protection
cover
burner
1x 1x 1x 1x 1x
Protection
grid
burner
end
side
1x 1x 1x 1x 1x
End bracket with stud bolts M8
1x
1x
1x
1x
1x
Holding
bracket
1x 1x 1x 1x 1x
Angled bracket with stud bolt M8
4x
4x
6x
6x
8x
Clamp
6x 6x 8x 8x 10x
Set fixing material
1x
1x
1x
1x 1x
Arcticle number
12670800 12670800 12674350 12670810 12670820
Tab. 11: Overview delivery scope ball guards
Assembling
(
Description for heater novoSchwank 45S U,
other types similar)
1.
Mounting heater as usually acc. manual
[see chapter 9, page 21 – 24].
Note the required sideways slope of the heater
of 20mm in ball protection grid application
[Fig. 41].
2.
Fix end bracket at inner side of turnaround box,
open and close again 4 nuts M8 [Fig. 43].
3.
Fix two angled brackets at each tube hanger
[screws M8 x 60, nuts] [Fig. 44].
Screw on angled brackets at the inner holes of
suspension bracket
4.
Holding bracket put loose on the first reflector
[view from burner kit] and screw together with
two angled brackets [screws M8 x 60, nuts),
holding bracket remain axially movable [Fig. 45].
5.
Assembling segments ball protection grids starts
on the turnaround box. Put first segment ball
protection grid L=2963 mm
from below
on end
bracket and angled brackets of the next
suspension bracket – Put clamps on stud bolts
M8 and mount with self-locking nuts
Mount clamp loose on one stud bolt of angled
bracket for further assembling next protection
grid [Fig. 46]
6.
Put next segment ball protection grid
L= 1843 mm
from below
on angled brackets
and mount clamp with self-locking nuts M8,
clamp and angled bracket connect two
segments ball protection grid to each other.
Mount clamp loose on one stud bolt of angled
bracket for further assembling next protection
grid.
7.
Put next segment ball protection grid
L= 1843mm
from below
on angled brackets and
mount clamps with self-locking nuts M8
Last segment ball protection grid L= 1843 mm
protects the burner kit at the bottom.
