@@@@2.2.1
2 Safety
EN Wall, ceiling and floor grinding machine WDS 250
WDS250‐en‐220909
6
The operating personnel responsible for the grinding
machine must ensure that no one can enter the grinding
machine’s danger zone during operation!
The safety distance during operation must be at least 10 m.
Risk of injury if safety equipment has been removed or is
non‐functional!
The safety equipment must be checked for completeness
and function before starting up!
The safety equipment must be in place during operation!
The surfaces to be ground by the grinding machine must
be free of obstacles and free of loose objects, which could
be flung out during grinding.
The grinding machine must be switched off immediately if
heavy vibrations or unusual noises occur during operation
so that cause can be removed.
Risk of injury from rotating grinding machine parts!
Limbs and clothing can be drawn in!
Proceed with the greatest care and caution!
Any work required for the hydraulic system may only be
performed by technicians with the requisite levels of
qualification.
Risk of poisoning due to harmful substances at the
workplace!
Eating, drinking or smoking at the workplace is prohibited!
Always eat in break rooms or canteen areas!
After completing the work, thoroughly clean yourself!
A general inspection of the machine must be conducted
before starting up the grinding machine! Particular attention
should be paid to damaged or loose components, and
wear! The grinding machine may only be put into operation
if it is in perfect technical condition!
Attachments and modifications to the grinding machine
which may affect the operational safety are prohibited!
Place the grinding machine with the supporting feet on a
level, horizontal floor with adequate load capacity (e.g. pal
let or floor) (
!
Fig.)!
Cleaning and maintenance may be done only by trained
personnel!
Maintenance must be conducted according to the operation
manual and maintenance plan!
Do not operate the grinding machine in areas where there
is risk of explosion or where flammable materials are
present.
