8
2.4 switchable signal attenuation
With strong satellite signal all LED‘s are switched on for the level and quality
function of the Satfinder display. Please use the attenuator function. You can
reduce the signal by -5dB or-10dB to improve the fine tunning by using the
level and quality display of the Satfinder HD. Pressing the B button for 2
seconds you can reduce the attenuation of the signal by -5dB and when you
press the button for 4 seconds, you can reduce the attenuation of the signal
by -10dB.
2.5 reset
If you press both buttons together and hold them down for approx. 5 seconds,
this will reset the SAT-Finder HD.
3. InDICator LeD’s
3.1 Level (signal strength)
Signal strength is displayed to the user via 8 LEDs. Each LED can either be
″off”, ″flashing slowly”, ″flashing quickly” or ″on”.
3.2 Quality (signal quality)
Signal quality is displayed to the user via 8 LEDs.
3.3 Mode (mode of operation)
This LED shows the conditions of the attenuation of the signal. In -5dB, the
LED lights green at -10dB, the LED lights up red
BDA_SF9002_GB.indd 8
18.03.14 09:27