1
Installation
In.the.main.menu.use.
CH
▲ ▼
to select the line Installation and confirm with
OK
.
The.following.menu.will.appear
.
Use.
CH
▲ ▼
to make a selection and confirm this with
OK
.
.
Use.
CH
▲ ▼
to select the line Reception and confirm with
OK
Here. you. can. use. the.
VOL
◀ ▶
. buttons. to.
switch.the.antenna.voltage.on.or.off.
WARNING:
The.antenna.voltage.must.only.be.switched.on.if.the.antenna.actually.is.an.active.room.antenna.with.
its own signal amplifier and does not already have a mains adaptor of its own (or similar) to supply
it.with.power..
Otherwise.this.may.result.in.a.short.circuit.or.may.destroy.your.antenna..
Press.
EXIT
.to.leave.the.menu..Use.the.
VOL
◀ ▶
.buttons.to.choose.whether.you.want.to.store.the.
changes made (Yes) or keep the previous settings (No). Confirm your choice with the
OK
.button.
Installation – Channel search
You.can.choose.between.automatic.and.manual.channel.search.
With.the.automatich.channel.search,.the.available.range.of.digital.television.channels.is.searched.for.
suitable.channels..
Automatic channel search
Use.the.
CH
▲ ▼
.buttons.to.move.the.cursor.in.the.Installation.menu.to.the.line.Channel.search.and.
press.the.
OK
.button..The.following.menu.will.appear:
