schwa-medico
TENStem eco basic
7
Description
All parameters can be adjusted via the keypad
and are indicated on the large display.
1. Display
2. Menu keys
3. Modification keys to adjust parameters
and intensities
4. ON/OFF key
5. Battery compartment
6. Output sockets for the cables
Keypad
to switch the device on and off
and to stop stimulation
P
to select a program
E
to set the parameters
to increase the intensity
(left for channel 1, right for channel 2)
to decrease the intensity
(left for channel 1, right for channel 2)
Operating the TENStem eco basic
Starting the device
Insert the batteries into the battery compartment (no. 5). Please also read
the chapter “Battery change” for more information. All symbols appear
automatically on the display. An acoustic signal indicates that the unit is ready
for use.
Connecting electrodes and cables
First connect the 2 mm diameter male connectors of the cables (red and white
connector on each cable) to the black female connectors of the electrodes
(always 2 electrodes per cable).
Connecting the cables to the TENStem eco basic
Connect the white plug at the other end of the cable to the sockets on the upper
front face of the TENStem eco basic (no. 6). You may use the device with one
or two cables depending on the therapy.
Switching ON the TENStem eco basic
5
1
4
3
2
6