7
schwa-medico
TENS eco 2
The program shown on the display is the last which was used during the previous session.
If the display shows a key symbol on the upper left side, the TENS eco 2 has previously
interlocked a specific program (see chapter interlocking the key pad).
Selecting a program
Select a program by pressing the
P
key. To scroll through the programs, press the
P
key
as often as necessary until you have selected the
program of your choice. To return to the previous
program, press one of the keys.
Selecting a program is only possible if the keypad has
not been interlocked on one specific program (see
chapter interlocking the keypad).
Setting the intensity
Start the stimulation by increasing the intensity
with the key of the channel(s) connected to the
electrodes.
key to increase the intensity
key to decrease the intensity
The intensity of each channel is displayed on the screen.
The intensity can be set between 0 and 100 mA.
By keeping the intensity keys pressed, the intensity will increase/decrease more rapidly.
Terminating the stimulation
You can terminate the stimulation at any time by pressing the
P
key. When the therapy
time is completed the stimulation terminates automatically. If you press the key the
stimulation stops and the TENS eco 2 switches OFF.
Interlocking the keypad
Choose the desired program by pressing the
P
key (see chapter choosing a program).
Press and hold for 3 seconds the
P
key and the right keys to interlock the TENS unit
on the chosen program. The TENS eco 2 can now only be used with the chosen program.
A key symbol appears on the display adjacent to the program number. All keys except
the intensity and the ON/OFF keys are interlocked into this mode. Use the same key
combination to unlock the TENS unit.
Switching OFF the timer
You can use the TENS eco 2 with or without timer. All programs run for 30 minutes. Press
and hold for 3 seconds the
E
key and the left key. The total therapy time appears on the
display. Press the
E
key to switch off the timer. The symbol “---“ appears on the display.
Press the key to save the changes.
Program
Intensity
Channel 1
Intensity
Channel 2
Stop
ON/OFF
