Assembly
32
03.00|WDP-5X |en
WDP-5X-BMG 99-60
The WDP-5X-BMG 99-60 base module has a change interface with
VERO-S SPA 40 clamping pins. This makes it compatible with
SCHUNK quick-change pallet modules VERO-S NSE plus 99 or
VERO-S NSE3 138. It therefore constitutes the basic holder for a
further changing module from the WDP-5X modular program.
The WDP-5X-BMG 99-60 contains no position-accurate torque-pin
for radial positioning on the quick-change pallet module. A
workpiece structure should therefore be fixed on several clamping
pillars in order to withstand the torque caused by the machining
forces.
The integrated change interface of the clamping system has a
central connection screw for clamping an adaptable stacking
module WDP-5X-SM or a workpiece direct clamping module WDP-
5X-DSM 99-70 or a compensation module WDP-5X-ASM 99-70
Ø36.
The WDP-5X-BMG 99-60 basic module has three air supply
connections G 1/8". The air supply is intended to supply a VERO-S
workpiece direct clamping module or a WDP-5X compensation
module with pneumatic actuation. The unlocking connection and
the turbo connection can be found on the front side. The turbo
connection serves to amplify the pull-in force on the quick-change
pallet system or the clamping force on the compensation module.
On the back there is an air connection for the air control to the
WDP-5X-DSM 99-70(-M).
5.3.2
