SCHUNK VERO-S NST3 400-250, Assembly And Operating Manual

Page: 6 / 44

General
6 02.00 | NST3 | VERO-S quick-change pallet system | en | 1344366
1.1.2 Applicable documents
• General terms of business *
• Catalog data sheet of the purchased product *
• Assembly and Operating Manual for VERO-S quick-change pallet
system NSE3 *
• Assembly and Operating Manual for VERO-S tombstone VAT /
VAT3 *
The documents labeled with an asterisk (*) can be downloaded
from
schunk.com .
1.1.3 Sizes
This operating manual applies to the following sizes:
Clamping station
• NST3 400-250
• NST3 500-300
1.2 Warranty
The warranty period is 24 months after delivery date from factory
or 500 000 cycles*, if it is used as intended, under the following
conditions:
• Observe the applicable documents,
} 1.1.2 [
/
6]
• Observe the ambient conditions and operating
conditions, } 2.5 [ / 9]
• Observance of the specified care and maintenance
instructions } 7 [
/
34]
Parts touching the workpiece and wear parts are not included in
the warranty.
* A cycle consists of a complete clamping procedure ("opening"
and "closing" of the simultaneously actuated clamping modules on
the clamping station).
1.3 Scope of delivery
The scope of delivery includes
• Clamping station in the version ordered
• Accessory pack
NST3 400-250: 2 sealing rings G1/8“, 2 sealing nipples G1/8“
NST 500-300: 2 sealing rings G1/8“, 2 sealing nipples G1/8“ NW
7.4, 2 eye bolts M12, bore hole cover plate