Operation
04.00|1400904 NSP 140, NSP-S 140 |en-US
25
Operation
WARNING
Risk of injury due to losing pallets or workpieces in the case of
incorrect actuation caused by incorrect operation
•
Disconnect the energy supply after locking.
•
Use check valves or safety switches.
•
The danger zone must be surrounded by a protective
enclosure during operation.
WARNING
Risk of injury due to falling parts during transport of the quick-
change pallet system, when the axis of the clamping ring is in a
horizontal position, or in the case of overhead application
•
Use a crane for transportation.
•
In the case of overhead application, or if the system is in a
horizontal position, secure the pallets or workpieces so that
they do not fall when releasing the clamping module.
WARNING
Risk of injury due to losing pallets or workpieces if the hydraulic
supply drops or fails, and due to the clamping rings immediately
closing
•
Do not reach into the clamping module.
•
Use pressure maintenance valves.
•
Use loading devices.
CAUTION
There is a risk of limbs being crushed by moving parts during
manual loading and unloading and the clamping procedure.
•
Do not reach into the clamping ring receptacle.
•
Work with the smallest possible clamping and opening
strokes.
•
Use loading devices.
•
Wear protective gloves.
7
