Basic safety notes
2.7 Personal protective equipment
Use of personal protective equipment
Personal protective equipment serves to protect staff against
danger which may interfere with their health or safety at work.
• When working on and with the product, observe the
occupational health and safety regulations and wear the
required personal protective equipment.
• Observe the valid safety and accident prevention regulations.
• Wear protective gloves to guard against sharp edges and
corners and rough surfaces.
2.8 Notes on safe operation
Incorrect manner of working by personnel
An incorrect manner of working can make the product unsafe and
risks serious injuries and considerable material damage.
• Only toolholder mountings suitable for the tool adapter may be
clamped.
• Modified or damaged toolholder mountings must not be
clamped with the Toolfix adapters.
• Do not use a hammer to loosen any stuck screws on clamped
toolholder mountings.
• Avoid any manner of working that may interfere with the
function and operational safety of the product.
• Use the product as intended.
• Observe the safety notes and assembly instructions.
• Do not expose the product to any corrosive media.
• Rectify malfunctions as soon as they occur.
• Observe the care and maintenance instructions.
• Observe the current safety, accident prevention, and
environmental protection regulations for the application field of
the product.
Maintenance specifications
Follow the maintenance and care instructions. These instructions
relate to a normal industrial environment. If the product is to be
operated in an environment with abrasive dusts or corrosive or
aggressive fumes or fluids, prior approval must be obtained from
SCHUNK.
9
01.00 | | TOOLFIX modular tool mounting device | en | 1510829
