Basic safety notes
10
01.00 | | TOOLFIX modular tool mounting device | en | 1510829
Safety during assembly and servicing
During assembly, connection, adjustment, commissioning and
testing, make sure that no accidental operation of the system by
the installation technician or other persons is possible.
2.9 Transport
Handling during transport
Incorrect handling during transport can make the product unsafe
and risks serious injuries and considerable material damage.
• When handling heavy weights, use lifting equipment to lift the
product and transport it by appropriate means.
• During transport and handling, secure the product to prevent it
from falling.
• Do not walk under suspended loads.
2.10 Malfunctions
Behavior in case of malfunctions
• Immediately remove the product from operation and report the
malfunction to the responsible departments/persons.
• Order appropriately trained personnel to rectify the
malfunction.
• Do not recommission the product until the malfunction has
been rectified.
• Test the product after a malfunction to establish whether it still
functions properly and ensure no further risks have arisen.
2.11 Disposal
Handling during disposal
Incorrect handling during disposal can make the product unsafe
and risks serious injuries and considerable material and
environmental harm.
• Follow local regulations on dispatching product components for
recycling or proper disposal.
2.12 Fundamental dangers
General
• Observe safety distances.
• Never deactivate safety installations.
