Technical Data
01.00|SWS-001 |en
11
Technical Data
Specifications such the as payload, moment capacity, repeatability,
and weight for model can found in the product catalog and on our
website.
Drawings also can found in the product catalog and on our web-
site. 2-D and 3-D models are also available on our website.
Contact SCHUNK for specific information and drawings regarding
your installation. We encourage you to use our service department
to review your designs and answer your questions.
SWK Quick-Change Head and SWA Quick-Change Adapter
Suggested Payload Limit
1.4 kg
The mass attached to the Tool Changer.
Operating Pressure Range
4.5 - 5.5 bar Locking mechanism supply pressure oper-
ating range. Supply to be clean, dry, and
filtered.
Coupling Force @ 5 bar
170 N
Axial holding force.
Static Moment Capacity:
(x, y) 0.98 Nm
Maximum recommended working load for
optimum performance of the Tool Chan-
ger.
(z) 1.15 Nm
Torsion
Positional Repeatability
0.0102 mm Repeatability tested at rated load at one
million cycles.
Weight
0.056 kg
0.038 kg
SWK
SWA
Max.
Recommended
distance
between SWK and SWA
1.0 mm
No-Touch
TM
locking technology allows the
SWK and SWA to lock with separation
when coupling.
4
Summary of Contents for SWS-001
