SCHUNK SWG 25, Assembly And Operating Manual

Page: 6 / 24

Basic safety notes
6 01.01|Ident.-Nr. 30074722|en
Basic safety notes
Intended use
The product was designed to grip and to temporarily and securely
hold workpieces and objects.
The product is intended for installation in a machine/system. The
requirements of the applicable guidelines must be observed and
complied with.
The product may be used only in the context of its defined applica-
tion parameters
(

6, Page 13) .
The product is designed for industrial use.
To use this unit as intended, it is also essential to observe the
technical data and installation and operation notes in this manual
and to comply with the maintenance intervals.
Not intended use
Use which is not specified as an intended use is for instance when the
product is for example used as a pressing tool, stamping tool, lifting
tool, guide for tools, cutting tool, tensioning mean, boring tool.
Environmental and operating conditions
• Make sure that the product and the top jaws are a sufficient
size for the application.
• Make sure that the environment is free from splash water and
vapors as well as from abrasion or processing dust. Exceptions
are products that are designed especially for contaminated en-
vironments.
Product safety
Dangers arise from the product, if:
• the product is not used in accordance with its intended purpose.
• the product is not installed or maintained properly.
• the safety and installation notes are not observed.
Avoid any manner of working that may interfere with the function
and operational safety of the product.
Wear protective equipment.
NOTE
More information are contained in the relevant chapters.
2
2.1
2.2
2.3
2.4