Basic safety notes
12
03.00 | SHS | Assembly and Operating Manual | en | 1002529
2.13 Notes on particular risks
WARNING
Risk of injury due to unexpected movements!
If the power supply is switched on or residual energy remains in
the system, components can move unexpectedly and cause seri-
ous injuries.
•
Before starting any work on the product: Switch off the power
supply and secure against restarting.
•
Ensure that no residual energy remains in the system.
WARNING
Risk of crushing due to objects falling or thrown out!
If a component breaks during operation or when pressure drops,
the load can no longer be held. Items may fall or be thrown out,
causing serious injury..
•
Check the product for damage before operation. Repair if ne-
cessary.
•
Observe the maintenance intervals.
•
Do not operate the product with defective and / or damaged
seals. Replace defective and / or damaged seals immediately.
•
Take appropriate protective measures to secure the danger
zone.
WARNING
Risk of crushing due to objects falling or thrown out!
If the maximum permissible load is exceeded, the product can no
longer hold the load. This load can be thrown out and lead to ser-
ious injuries.
•
Ensure that the permissible load is not exceeded.
•
Take appropriate protective measures to secure the danger
zone.
WARNING
Danger of crushing due to falling objects!
When transporting, assembling, disassembling and servicing, the
product may fall down if the position changes unintentionally and
result in serious injury.
•
Wear suitable protective equipment.