Power Chuck with extended and standard jaw stroke (LH)
04.00|0889132_ROTA TB2 / ROTA TB2 LH |en
63
Power Chuck with extended and standard jaw stroke
(LH)
Do not use dual stroke chucks (LH series) for I.D. clamping. Also, do
not clamp workpieces on the fast stroke, since this stroke executes
very large jaw strokes but very low clamping forces
(1)
. In chucks
of the TB2 LH series, make sure that the entire fast stroke plus at
least 1/3 of the clamping stroke (corresponding to the basic
overlap) is traveled during workpiece clamping
(2)
.
11
