Maintenance
36
02.00 | RCV | Assembly and Operating Manual | en | 1453513
8.7 Changing the ring cylinder assembly
RCV 250
RCV 490
1. Remove the compressed air hose.
2. Loosen the mounting screws (1) and disassemble the main
housing (2) from the rear housing assembly (5).
3. Loosen the mounting screws (3) and disassemble the ring
cylinder assembly (4).
4. Lubricate the O-rings in the new ring cylinder assembly and the
bore holes in the rear housing assembly.
5. Align the new ring cylinder assembly (4) with the centering
bore hole in the rear housing assembly (5) and slide it carefully
into the rear housing assembly.
6. Fasten the ring cylinder assembly (4) in the rear housing
assembly (5) with mounting screws (3).
✓
Max. tightening torque: 1.36 Nm
7. Place the main housing (2) on the rear housing assembly (5)
and fasten with mounting screws (1).
✓
Max. tightening torque: 2.83 Nm
8. Connect all compressed air lines.
