Assembly
08.00|PGB 64 - 125|en
27
FPS flexible position sensor
Fig. 13
To use the flexible position sensor FPS-M8, the grippers have to be
retrofitted with a special mounting kit. This mounting kit is availa-
ble from SCHUNK for the models below (see catalog):
• PGB 80
• PGB 100
• PGB 125
Fig. 14
1 Remove the control cam (15) and the screws (42/43) from one
side of the gripper.
7.3.4
Mounting of the
mounting kit
www.comoso.com
