Assembly
08.01|PFH 30-50|en
21
Part gripped:
1 Mount the proximity switch with a sensing distance of 0,5 mm
as previously described.
2 Clamp the part to be gripped.
3 Loosen the screws (4 or 5) so that the bracket (3 or 6) may be
moved together with the proximity switch (2 for I.D.- or 5 for
O.D.gripping), until it switches.
4 Slide the bracket together with the proximity switch below the
monitoring screw (1 for I.D.-, or 6 for O.D.-gripping), until it
switches.
5 Control function by actuating the gripper and then the work-
piece to be gripped, again.
www.comoso.com
