SCHUNK MLD-L, Assembly And Operating Manual

Page: 92 / 96

Spare parts
92
02.00 | MLD-L | Montage- und Betriebsanleitung | en | GAS364815
8 Spare parts
8.1 Note regarding spare part orders
SCHUNK products are always subject to technical modification and
improvement. To avoid incorrect deliveries, and to order parts
without a part number, always provide the information specified
on the name plate as well as the serial number of the module.
Original spare parts
Use only original spare parts of SCHUNK when replacing spare and
wear parts.
8.2 Wearing parts
The expected life span depends on the respective application,
ambient conditions, load and cycle time.
Part no. Wearing part Note
GAS361448 Recirculating ball bearing size 42 2 pairs are required
Replacement Changing the
recirculating ball bearing [ } 83]
8.3 Spare parts
Part no. Spare part Note
GAS361448 Recirculating ball bearing size 42 2 pairs are required
GAS368620 Linear motor MLS 20-66-25 RS
GAS368650 Linear motor MLS 20-66-25 LS
GAS368864 Linear motor MLS 10-66-15 RS
GAS368866 Linear motor MLS 10-66-15 LS
LE100 measuring system
Specify cable length and
controller interface
GAS344340 Complete brake installation kit
8.4 Aids
Part no. Spare part Note
GAS361490 Force measuring cell size 42 2 pieces are required
GAS323712 Measuring system tester
GAS358951 Special grease 250 g
GAS37214 Maintenance kit recirculating ball-
bearing systems