_________________________________________________________________________________________
schunk.com
XND.00014.002_A – 10/2018
18
3
Description of the clamping device
The KSO has been designed for clamping raw parts and finished workpieces.
A wide range of accessories ensures the versatility of the equipment.
The force is generated mechanically and the power gear ratio is linear across the whole clamping
range.
Mounting and removing the KSO is quick and easy.
3.1
Function
The KSO is a direct vice with a driven mechanically via a capsuled thread. The clamping force
is generated directly in a linear manner, without a force amplifier.
The clamping forces depend on the torque.
4
Operation (standard operation)
4.1
Clamping / aligning
In its basic version, the KSO has 2 x Ø8 H7 positioning
holes with which to position it on grid plates with a
grid of 50 and in T-slot tables. The KSO is fixed from
below using 4 No. M8 cylinder screws.
Alternatively, the KSO can also be clamped with
standard clamping claws.
It is also possible to supply the KSO with customer-specific positioning and fixing holes ex
works.
