_________________________________________________________________________________________
schunk.com
XND.00019.003_A – 10/2018
27
3.1.3
Multiple vice with wedge clamping elements
In place of the adjustable jaws, it is also
possible to use wedge clamping elements
with two-sided effect and with support.
The max. clamping stroke of the wedge
clamping element is 6 mm, i.e. 3 mm for
each clamping jaw.
The tension is applied via the vertical M12
clamping screw with SW 8 hexagon socket.
The max. clamping force is 30 kN at a torque
of 85 Nm.
3.1.4
Clamping rail as base for modular set
The clamping rail with top-mounted gearing can also be used as a base element for holding
other clamping devices of the Schunk modular system:
-
APK adapter plate with VERO-S NSE plus 138 zero-point clamping module
-
APK adapter plate with ROTA-S plus 2.0 160 3-jaw chuck
-
APK adapter plate with KSC2 65 centric vice
4
Operation (standard operation)
4.1
Clamping / aligning
The base of the clamping rail has a number of fixing and positioning holes. Depending on
the length of the rail, the position and number of holes varies.
