_________________________________________________________________________________________
schunk.com
XND.00030.002_B – 10/2018
30
4.2
Jaw range
The reliable function of the clamping device is significantly affected by the selection of the
correct system jaws.
For further data, please see the current catalogue >> Schunk stationary Workholding <<
4.3
Jaw change
System jaws must be attached using cylinder screws with strength class 12.9:
KSC-F 80
each 2x M10 cylinder screws, clamping torque 60 Nm.
KSC-F 125
each 4x M10 cylinder screws, clamping torque 60 Nm.
KSC-F 160
each 4x M16 cylinder screws, clamping torque 140 Nm.
(Figure: KSC-F 125)
