SCHUNK KGG 100, Assembly And Operating Manual

Page: 18 / 52

Assembly
18 17.00 | KGG | Assembly and Operating Manual | en | 389166
5.2 Connections
5.2.1 Mechanical connection
WARNING
Risk of injury due to unexpected movements!
If the power supply is switched on or residual energy remains in
the system, components can move unexpectedly and cause
serious injuries.
•
Before starting any work on the product: Switch off the power
supply and secure against restarting.
•
Make sure, that no residual energy remains in the system.
Evenness of the
mounting surface The values apply to the whole mounting surface to which the
product is mounted.
Requirements for evenness of the mounting surface (Dimensions in mm)
Edge length Permissible unevenness
< 100 < 0.02
> 100 < 0.05
Connections at the
base jaws
Connections to the base jaws
Item Mounting KGG
60 70 80 100 140
1 Thread in base jaws M3 M3 M4 M5 M5
2 Centering sleeve * Ø5 Ø5 Ø6 Ø8 Ø8
* Contained in accessory pack.