Maintenance
03.00 | GSW-B-AGE | Assembly and Operating Manual | en | 389555
27
6.5 Servicing and assembling the product
Maintenance
• Clean all parts thoroughly and check for damage and wear.
• Treat all greased areas with lubricant.
• Oil or grease bare external steel parts.
• Replace all wear parts / seals.
– Position of the wearing parts
Assembly
Assembly takes place in the opposite order to disassembly.
Observe the following:
• Unless otherwise specified, secure all screws and nuts with
Loctite no. 243 and tighten with the appropriate tightening
torque.
6.6 Seal kit
Content of the sealing kit:
• 1 × bellows
• 1 × gasket
• 1 × O-ring DIN 3771 (6.0×1.0)
• 2 × O-ring DIN 3771 (17.0×1.5)
ID.-No. of the seal kit
Seal kit for
ID number
GSW-B-AGE 50 - 100
5522231