Maintenance
50
06.00 | GSM-Z | Assembly and Operating Manual | en | 389110
8.11 Servicing and assembling the module
Maintenance
• Clean all parts thoroughly and check for damage and wear.
• Treat all greased areas with lubricant.
[
• Oil or grease bare external steel parts.
• Replace all wear parts / seals.
– Position of the wearing parts,
– Seal kit,
Assembly
Assembly takes place in the opposite order to disassembly.
Observe the following:
• Unless otherwise specified, secure all screws and nuts with
Loctite no. 243 and tighten with the appropriate tightening
torque.
