SCHUNK GSM-R 16, Assembly And Operating Manual

Page: 32 / 52

Commissioning
32
04.00 | GSM-R | Assembly and Operating Manual | en | 389106
Ø
Continue to open the exhaust throttle valve incrementally until
the movement decelerates smoothly.
✓
If the speed is too low, the product will brake too soon and
the end position will be reached too slowly.
✓
If the speed is too high, the product will impact against the
end position and the shock absorber will be overloaded.
NOTE
A smooth motion may also be too slow in many use-cases.
Further settings can be made via the shock absorbers,
Adjustment
of the shock absorber stroke [
}
32].
6.2 Adjustment of the shock absorber stroke
NOTE
When received from the factory, the unit is set to utilize the
maximum shock absorber stroke.
Movement
Target position
End position
Target time
Time T
Damping
The shock absorber stroke is too long and the end position is
reached too slowly.
Movement
Target position
End position
Target time
Time T
Damping
The shock absorber stroke is too short and the unit arrives in the
end position too abruptly.