Basic safetyinstructions
01/ELM/en/2011-07-25/MF-CW
7
2
Basic safetyinstructions
2.1
Intended use
The module is designed only for linear moving of payloads
in any position.
The module is intended for installation in a machine. The
requirements of the applicable directives must be observed
and complied with.
The module may be used only within the range of its defined
application parameters.
Any other use beyond this definition is deemed improper
and unintended use. The manufacturer will not be liable for
any resulting damages.
2.2
Environmental and operating conditions
The module may be used only within its defined
application parameters (see Chapter 6, page 16 and
catalog).
Do not subject the module to excessive vibrations and/or
mechanical shocks.
Ensure that the environment is clean and the ambient
temperature corresponds to the specifications in the
catalog. Observe the lubrication intervals (see Chapter
9.1, page 31).
Ensure that the environment is free of splashing water
and vapors, and also of abrasive dust and process dust.
This does not apply to modules designed especially for
unclean environments.
Ensure that the environment is free of ferromagnetic
particles or chips.
Strong magnetic fields can impair the function of the
module. If the product is to be used in strong magnetic
fields, contact your SCHUNK partner (see Chapter 12
page 39).
www.comoso.com
