Assembly
28
11.00 | EGN | Assembly and Operating Manual | en | 389056
5.2 Connections
5.2.1 Mechanical connection
Evenness of the
mounting surface
The values apply to the whole mounting surface to which the
product is mounted.
Requirements for evenness of the mounting surface (Dimensions in mm)
Edge length
Permissible unevenness
< 100
< 0.02
> 100
< 0.05
Choose the installation position so that connection cables are not
damaged or cannot wrap around the product when swiveling.
Preconditions for installing the connection cables:
• The cables are without tensile and torsion loads. Use cable
guide chains.
• The minimum bending radius (7.5 times the cable diameter) is
complied with.
Assembly of the top
jaws
Assembly of the top jaws
Depth of engagement and tightening torque
Item Mounting
EGN
80
100
160
1
Centering sleeve
Ø 8
Ø 10
Ø 12
2
Thread in the base jaws
M5
M6
M10
Max. depth of engagement
[mm]
10
13
17
Mounting screws as per
standard
DIN EN ISO 4762
