Assembly
24
25.00 | DPZ-plus | Assembly and Operating Manual | en | 389035
Connections at the
base jaws
Connections at the base jaws
Item Mounting
40
50
64
80 100 125 160 200
1
Thread in base jaws
M2.5 M3 M4 M5 M5 M6 M8 M12
Max. depth of engagement from
locating surface [mm]
5.5
7
8
10
10
12
13
20
2
Centering sleeve
Ø 4
Ø 5 Ø 6 Ø 8 Ø 8 Ø 10 Ø 12 Ø 16
5.2.1.1 Mounting of the gripper by using a spring loaded pressure-piece
CAUTION
The spring-loaded pressure piece is under spring tension.
The pressure piece can fly out in an uncontrolled fashion and
cause contusions.
•
During assembly or disassembly, be especially careful with the
springs.
When mounting the gripper from the side of the gripper fingers,
the assembly of the pressure piece must be done
after
the
mounting of the gripper.
Mounting the pressure piece is described in the insert "Installation
instructions - pressure piece", which is included in the pressure
piece's scope of delivery.
