Assembly
20
04.00 | AGE-S-XYZ | Assembly and Operating Manual | en | 389004
Compensation unit locked:
Ø
Lock compensation unit.
Ø
Push O-ring (58) onto the magnetic switch (M2).
Ø
Lay the cable of the magnetic switch into the groove of the
clamping element (17).
✓
The O-ring (58) should be located between the magnetic
switch and clamping element (17).
Ø
Push the magnetic switch 2 (M2) with the clamping element
(17) into the bore hole on the housing until the magnetic switch
touches the base of the borehole.
Ø
Turn the magnetic switch on the cable about its own axis until it
switches.
Ø
Fix the magnetic switch (M2) in this position and clamp it by
tightening the screw (59).
Ø
Test the function by unlocking and locking the compensation
unit.
Further information
2
