General
6
02.00 | PW V6 | Assembly and operating manual | en | 389670
1.1.2 Applicable documents
• General terms of business*
• Catalog data sheet of the purchased product *
• Assembly and operating manuals of the accessories *
• Software manual "Motion Control SCHUNK" *
The documents marked with an asterisk (*) can be downloaded on
our homepage
schunk.com
1.2 Warranty
If the product is used as intended, the warranty is valid for 24 months
from the ex-works delivery date under the following conditions:
• Observe the specified maintenance and lubrication intervals
• Observe the ambient conditions and operating conditions
Parts touching the workpiece and wear parts are not included in
the warranty.
1.3 Scope of delivery
The scope of delivery includes
• Servo-electric rotary pan-tilt actuator PW V6
in the version ordered
• M5 plug for RS232 interface
• Adaptor cable, USB to M5 plug (length 2 m)
• DVD
Contents of DVD:
• "SCHUNK Motion Tool (MTS)" configuration and commissioning tool
• "SCHUNK Motion Tool (MTS)" software manual
• "SCHUNK Motion Protocol (SMP)" software manual
• "SCHUNK Drive Protocol (SDP)" software manual
• Firmware manager
• Assembly and Operating Manual
• USB driver
1.4 Accessories
The following accessories, which must be ordered separately, are
required for the product:
• Hybrid cable
• Connection cap
– DMI
NOTE
The product is delivered without the connection cap. This must be
ordered separately as an accessory. A connection cap is necessary
to operate the product.
A wide range of accessories are available for this product
For information regarding which accessory articles can be used
with the corresponding product variants, see catalog data sheet.
