Variants
4
02.00 | SVP-2D / SVP-2D/H / SVP-4 / SVP-3 | Assembly and Operating Manual | en | 0289052
1 Variants
This operating manual applies to the following variations:
Fixed scanner
• Retrofit kit for fixed scanner for TRIBOS SVP-2D / SVP-2D/H
(with software version 1.3)
ID number: 25005597, 0201754
• Retrofit kit for fixed scanner for TRIBOS SVP-4 and SVP-2D /
SVP-2D/H
(SVP-2D / SVP-2D/H from software version 1.4)
ID number: 25005596, 0201755
• Retrofit kit for fixed scanner for TRIBOS SVP-3
ID number: 25006022, 1302194
Handheld scanner
Retrofit kit for
handheld scanner
• Retrofit kit for handheld scanner for TRIBOS SVP-2D / SVP-2D/
H / SVP-3
(SVP-2D / SVP-2D/H with software version 1.3)
ID number: 0201756
• Retrofit kit for handheld scanner for TRIBOS SVP-4 and SVP-2D /
SVP-2D/H
(SVP-2D / SVP-2D/H from software version 1.4
ID number: 0201758
1.1 Usage
The retrofit kit may only be used for the following TRIBOS-
Polygonal clamping systems:
• TRIBOS-Mini
• TRIBOS-RM
• TRIBOS-S
For operation of the retrofit kit, only reducing inserts with labeled
DMC codes may be used. The use of reducing insertw without
DMC is prohibited.
For the operation of the retrofit kit in conjunction with SVP-2D, it
is recommended to have the parameter settings adjusted by a
SCHUNK service technician ( P0: 00014 for german or P0: 00015 for
english). This setting sets the target pressure to zero during
pressure built-up.
For operation or the retrofit kit in conjunction with SVP-4, it is
recommended to set the parameter setting "clear target
pressure" (see Operating manual SVP-4).