Schumacher SpeedCharge XM1-5 User Manual Download Page 13

• 12 •

MOViNG ANd STORAGE iNSTRUCTiONS

15. 

Store the charger unplugged, in an upright position. The cord will 

15.1 

still conduct electricity until it is unplugged from the outlet. 

Store inside, in a cool, dry place (unless you’re using an on-board 

15.2 

Marine Charger).

Do not store the clips clipped together, on or around metal, or 

15.3 

clipped to cables. 

If the charger is moved around the shop or transported to another location, 

15.4 

take care to avoid/prevent damage to the cords, clips and charger. Failure 

to do so could result in personal injury or property damage.

TROUBLESHOOTiNG

16. 

PROBLEM

POSSiBLE CAUSE

REASON/SOLUTiON

Charger will not turn 

on when properly 

connected. 

AC outlet is dead. 

AC POWER LED is 

not lit.
Poor electrical 

connection. AC 

POWER LED is not lit.
Severely discharged, 

but otherwise good, 

battery.

Clips are not making 

a good connection 

to the battery. 

CONNECTED LED is 

not lit.

Check for an open 

fuse or circuit breaker 

supplying the AC outlet.
Check the power cord 

and extension cord for 

a loose fitting plug.

The battery may not 

want to accept a 

charge due to a run-

down state. Allow the 

charging to continue 

until the battery has had 

a chance to recover 

sufficiently enough to 

take a charge. If more 

than 20 minutes, stop 

charging and have the 

battery checked.
Check for poor 

connection to battery 

and frame. Make sure 

connection points are 

clean. Rock clips back 

and forth for a better 

connection.

Summary of Contents for SpeedCharge XM1-5




































Reviews: