3
B.
PERSONAL PRECAUTIONS AND SAFETY
C.
GROUNDING AND AC POWER CORD CONNECTION INSTRUCTIONS
D.
ENREV ENHANCED
1.
WARNING:
Wear complete eye protection and clothing
protection when working with lead-acid batteries.
2.
Make sure someone is within range of your voice or close
enough to come to your aid when you work with or near a
lead-acid battery.
3.
Have plenty of fresh water and soap nearby for use if battery
acid contacts skin, clothing, or eyes. If battery acid contacts
skin or clothing, wash immediately with soap and water.
4.
Avoid touching your eyes while working with a battery. Acid
particles (corrosion) may get into your eyes! If acid enters
your eye, immediately flood eye with running cold water for
at least 10 minutes. Get medical attention immediately.
5.
Remove all personal metal items such as rings, bracelets,
necklaces, and watches when working with a lead-acid
battery. A lead-acid battery can produce a short-circuit
current high enough to weld a ring (or the like) to metal,
causing a severe burn.
6.
Take care not to drop a metal tool or other metal onto the
battery. Metal may cause sparking or short circuit the battery
or another electrical device. Sparking may cause an
explosion.
7.
Always operate battery charger in an open, well- ventilated
area.
8.
NEVER
smoke or allow a spark or flame in the vicinity of
the battery or engine. Batteries generate explosive gases!
9.
NEVER
allow children to charge the battery. Battery charging
must be done by adults only.
10.
WARNING:
Handling the cord on this product or cords
associated with accessories sold with this product, will
expose you to lead, a chemical known to the State of
California to cause cancer and birth defects or other
reproductive harm.
Wash hands after handling.
Charger should be grounded to reduce risk of electric shock.
Charger is equipped with an electric cord having a grounding
plug. The plug must be plugged into an outlet that is properly
installed and grounded in accordance with all local codes and
ordinances.
DANGER – Never alter AC cord or plug provided – if it will not fit
outlet, have proper outlet installed by a qualified electrician.
Improper connection can result in a risk of an electric shock.
CAUTION – To reduce risk of fire or electric shock, connect
battery charger directly to grounding receptacle (three-prong).
An adapter should not be used with battery charger.
Enrev Enhanced is a patented and proprietary battery charging technology that allows your Charge ‘N Ride™
charger to charge your battery more quickly and efficiently, providing you with long life for your rechargeable
battery. Patent numbers 5,694,023, 4,829,225 & 5,889,385.
E.
PREPARING TO CHARGE
1.
Make sure you have one of the 12 volt battery systems as
listed in “BATTERY TYPES AND CONNECTORS”.
2.
Remove battery from vehicle to charge. Make sure all
accessories in the vehicle are off, so as not to cause an arc.
3.
Clean and inspect battery. Examine the battery for excessive
wear, cracks, bulging or damage. If damage is detected, do
not charge and replace immediately. If battery is hot, allow
it to cool before charging.
4.
Study all battery manufacturer’s specific precautions.
5.
Be sure area around battery is well ventilated while battery
is being charged. Gas can be forcefully blown away by using
a piece of cardboard or other non-metallic material as a
fan.
