background image

• 8 •

BEHAVIOR

REASON

Green Ready LED solid; Red 

Fault and Clamp Reverse LEDs 

off; no beep. 

Cable is connected correctly to both 

battery and jump starter.

Red Fault and Clamp Reverse 

LEDs solid, Green Ready LED 

off; rapid beeping

Reverse polarity protection

No LED illuminated; no beep

Battery exhausted or poor connection

Red Fault LED solid, Green 

Ready and Red Reverse 

Clamp LEDs off; rapid beeping

Short circuit protection

Red Fault and Green Ready 

LEDs solid; Red Clamp 

Reverse LED off; beeps once 

per second

Temperature protection

NOTE: When the condition is corrected, the smart cable will automatically reset.

11.  SPECIFICATIONS

Internal battery type .......................................... Lithium ion polymer
Capacity ................................................................................. 37 Wh 
USB output ....................................................................5V DC, 2.4A 

USB Fast Charging: 5V, 3A / 9V, 2A / 12V, 1.5A 

Jump start ................................................800A peak/400A cranking
Charging Temperature......................................32°-113°F (0°-45°C)

12.  REPLACEMENT PARTS

Battery clamps/smart cable ............................................ 94500934Z
USB charging cable ................................................... 3899004188Z

13.  BEFORE RETURNING FOR REPAIRS

For REPAIRS OR RETURNS, visit 365rma.com
Visit schumacherelectric.com for Replacement Parts.

14.  LIMITED WARRANTY

For information on our one year limited warranty, please visit 

schumacherelectric.com or call 1-800-621-5485 to request a 

copy.
Go to schumacherelectric.com to register your product online. 

Schumacher

®

 is a registered trademark of Schumacher Electric Corporation.

Summary of Contents for SL1396









Reviews: