EN
29
Installing the appliance
Insufficient room ventilation may pro
longe the drying time and increase the
energy consumption. Do not install the
dryer in an enclosed area or in any area
without fresh air circulation.
►
The dryer must be installed in a room
that is adequately ventilated.
►
During the drying process take care to
ensure that the room is well ventilated
(open windows or the door, unclosable
ventilation openings in the walls or
doors).
Installation area
In order to ensure the stability of the
appliance, the installation area must be
firm and level.
Soft floor coverings, e.g. fitted carpets
or coverings with a foamed material
backing are not suitable as an installa
tion area.
Do not obstruct the ventilation grille
at the bottom of the front of the
appliance, otherwise sufficient flow of
cooling air cannot be guaranteed.
►
Keep the area surrounding the dryer
free of dust and fluff.
Fixing set
For installation on slippery ground, e.g.
installation base with tile surface, two
selfadhesive receptacles secure the
machine from shifting.
You can purchase the following fixing
sets at your specialist retailer or
through our customer services team:
►
Steel fixing set – to be drilled
Order No S110
►
Plastic fixing set – selfadhesive
Order No 51215
Keep machine dimensions in mind
The minimum distance between the
machine and the wall or possibly another
machine is 1 cm.
Important
The machine must be placed with its
back against a wall.
Summary of Contents for WT 14 MFH W
Page 34: ...34 Notizen Notes Note ...
Page 35: ...35 ...