Schulthess topLine pro TA 9340, Operating Instructions Manual

Page: 17 / 40

17
Cleaning the fluff filter
When fabrics are used, the fibres
are rubbed (laundry fluff), which are
released when the fabrics are dried,
collecting in the fluff filter in the door
opening.
A clogged fluff filter may affect the
drying process.
Clean the fluff filter after every
drying programme
►
Pull out the fluff filter and swing it open.
►
Rub your hand over the inside of the
filter to remove the fluff.
►
Replace the fluff filter and make sure it
is in the correct position.
Notice
It may happen that a supposedly
proper cleaned filter becomes imper-
meable, due to a fine, invisible coat
remaining in the filter meshes.
►
Pour a little water on to the inside of
the filter. If it is impermeable, clean the
filter with a brush under running water.
Descaling the fluff filter
If the coat cannot be brushed away,
a commercial descaler spray must be
used to dissolve it.
►
Spray the descaler on the entire filter
surface and leave it to take effect. In
case of stubborn coats place one layer
of kitchen roll onto the filter surface
and spray descaler on it to ensure the
filter is moist. Leave the descaler to
take effect overnight. Then clean the
filter under running water with a fine
brush.
Notice
►
Never operate the machine with a
damaged fluff filter.
Fluff filters are consumables and
replacements can be ordered from our
customer service department.
Switching off the machine
►
Press button
On / Off
until the
display turns off.
►
Unplug the machine, when not used
for longer periods of time.