43
Consumption values
The consumption values and programme durations given
are approximate values which were determined under
stan dard conditions. Fluctuations of up to 10% are pos-
si ble.
Reduced mains connection
On machines with reduced mains connection, the
pro gramme times will be extended accordingly.
Hot water supply
In the case of washing machines with a hot water supply,
the following points should be noted:
The max. permissible hot water temperature is 70 °C.
For pre-wash, delicates programmes and programmes
≤
30 °C only cold water is used.
In the temperature range
≥
40 °C, the water is mixed
automatically to the programmed washing temperature.
In the case or textiles soiled with blood or proteins,
select a programme with pre-wash so that the stains will
be washed out below 30 °C to ensure that they cannot
become fixed to the fabric at higher temperatures in the
main washing cycle.
Washing
Preparation
Check that:
X
the pump cover is screwed on (see chapter «Cleaning
and Maintenance»)
X
the mains plug or the wall switch is turned on.
X
the water tap is turned on.
When all pilot lamps are flashing, the machine is
ready for use.
X
If one of the control lights stays on, press the «Quick
Wash» button until the message «Please select pro-
gramme» is displayed.
Note
If the display is dark, it can be activated by pressing
any button.
Opening the loading door
X
Press the «Open door» button.
The loading door springs open.
X
Note: The loading door only springs open if the main
power supply is switched on.
Selecting the wash programme
X
Press the programme button
The control light for the selected programme lights up.
The display shows the wash temperature, the selected
programme and the programme duration.
Backward in steps
X
During entry it is possible to move backward in the
programme in steps using the button back.
Selecting additional programmes
X
Press the desired selector button (see chapter «Addi-
tional program mes»).
The text for the selected additional programme
appears on the display.
Selecting additional functions
After programme selection, various additional functions
can be selected.
X
Press button «Next in programme selection»
.
The display will show the possible settings (see chapter
«Additional functions»).
The displayed values can be changed and/or selected
using the selector buttons.
Adding laundry
X
Weight measurement of the laundry will only work
properly, if the wash programme has been selected
before loading the laundry.
X
Place the laundry loosely in the drum, small and large
pieces mixed together.
Closing the door
X
Close the door by pushing it until the lock audibly
engages.
X
Ensure that no items of laundry are trapped between
the door and the rubber seal.
If the door is not closed, a safety switch prevents the
machine from starting.
