32
MACHINE OPERATION
Machine does not
start when pressing
the On / Off
button
►
Check whether the mains power is switched on (wall / plug).
►
Check whether all the fuses are intact or the safety switch
has tripped.
Mains blockage (generally at noon).
►
Operate the machine after the mains blockage has ended.
►
If the dryer does not start despite correct power supply,
contact customer service.
The dryer
does not start
►
Press button
.
►
If the programme does not start despite pressing the start
button, contact customer services.
Notice
When time preset is activated, the programme starts only
at the pre-selected time.
The drying target
was not achieved
When warm, laundry feels more moist than it actually is!
►
Remove the laundry from the dryer and let it cool.
When still moist:
►
Clean the fluff filters (see
Drying / Cleaning the fluff
filters
).
►
Increase degree of drying (see
Settings / Dryness level
raised
).
►
Clean the moisture sensor (see
Cleaning and Mainte-
nance / Cleaning the moisture sensor
).
The individual laundry
piece does not reach
the set drying target
►
If one single piece is to be dried in the dryer, it will be
dried more evenly by adding additional pieces, e.g. two terry
towels or using the
Express
programme option.
The drying takes
too long
►
Clean the fluff filters (see
Drying / Cleaning the fluff
filters
).
Power failure.
►
Note lock times of EW.
The laundry is not dry
after the maximum
possible settings
Drum is overloaded.
►
Observe the maximum loads in the programme table.
Insufficient room ventilation.
►
Open a window or door.
