Schulthess Priate household, Operating Instructions Manual

Page: 14 / 60

14
Fabric softener, fabric conditioner
Before adding thick fabric softener add
water and stir to ensure that it is free of
lumps so that the siphon does not get
blocked.
►
Add to the fabric softener to compart-
ment of the detergent drawer.
Notice
Do not exceed the «max» mark in the
fabric softener compartment. Otherwise
it will be washed in at the beginning of the
programme together with the detergent,
instead of in the programme step «Finish».
Bleach, stain removal salt
For bleachable stains you can add powered
laundry bleach and stain removal salt to
your laundry detergent.
►
For best washing in results, add the
laundry detergent first and then the
laundry bleach or stain removal salt
into
compartment
.
Impregnating agent
Garments can be evenly and permanently
impregnated in the washing machine.
Breathable all-weather clothing such as
GoreTex or SympaTex must only be treated
with the specifically designated impreg-
nating agent. Otherwise you risk blocking
the breathing membranes (see also
Programmes / Sportswear,
outdoor / Impregnating
).
Hot water supply
The following points should be noted:
►
The max. permissible hot water
temperature is 70 °C.
►
For pre-wash, for programme temper-
ature of ≤ 30 °C as well as for the pro-
grammes «Delicates» and «Curtains»,
only cold water is used.
►
For programme temperatures ≥ 40 °C,
cold and warm water is mixed until
the programmed wash temperature is
reached.
Notice
In the case or textiles soiled with blood
or proteins, select the option
Prewash
.
Washing these stains out at a temperature
of about 30 °C prevents setting the stain
on the fabric at higher temperatures during
the main-wash.
Rainwater connection
If you wish to use rainwater, this must be
filtered or hygienically clean to avoid con-
tamination.
Notice
A rainwater utilisation system is required
to operate your washing machine with
rainwater.
Rainwater is also used for the «Finishing
rinse» programme stage.