Fine filter (2)
1. Open the door and remove the lower
basket.
2. Hold the fine filter by the handle.
3. To remove the fine filter, turn the handle
to the right.
4. Clean the fine filter fully with a brush under
running water.
5. Put the fine filter back in position.
6. To lock the fine filter system, turn the han-
dle to the left. Make sure that the signs on
the filter agree with each other.
Cleaning the spray arms
At regular intervals make sure that the
nozzles in the spray arms are not
blocked. If necessary, clean the nozzles
with a piece of wire or a needle under
running water.
Caution!
To prevent damage to the
nozzle openings, clean them carefully.
Ceiling spray arm
1. Turn the fixing screw (A) counterclock-
wise.
2. Pull the spray arm off the shaft.
3. Clean the spray arm and the fixing screw.
4. Attach the spray arm with the fixing screw
by turn it clockwise.
Upper basket spray arm
1. To remove the upper basket spray arm,
turn it laterally.
2. Clean the spray arm.
3. To attach again the spray arm, press up-
wards until it goes back into position.
Lower spray arm
1. Turn the fixing screw B) counterclock-
wise.
2. Pull the spray arm off the shaft.
90