EN
Safety
Directions for use for the power pack
37
Manufacturer's address
Schlüter-Systems KG
Schmölestraße 7
58640 Iserlohn, Germany
Phone: +49-2371-971-0
Fax: +49-2371-971-111
[email protected]
2
Safety
2.1
Intended use
The components of the LIPROTEC system are used only to
create decorative or accentuating lighting effects indoors,
privately or commercially.
The system may be used in bathrooms or wet rooms only
under consideration of the types of protection of the
components and scope of protection according to DIN VDE
0100-701.
The component must not be used for the following
applications under any circumstances:
Outdoors
Underwater
In potentially explosive atmospheres
In swimming pools, saunas or steam baths
Exceeding the load limit required for the power pack is
possible through an incorrect combination of the system
components. This can be the case if LED strips are expanded
